iStation is Plants personal water reservoir featured with a valve, so you can control the flow of water going to your plant even to drops, completely shut of the water. It is made with PLA plastic.

"...small plants used 1 tablespoon [of water] per day, while large plants used slightly less than 2 tablespoons per day." (www.greenhousemag.com);

So simply feel iStation up with water, place it in the soil inside the flower pot, adjust the flow of water to intermittent single drops.

Gross Weight: 0.222lb (0.101kg)

Dimensions:

- height: 28cm tall (11.023in)

- width: 10cm (3.93in)

Z-Valve gives you the power to be fully in control of how much water you want flowing out of the water container even to the to the drops. It can also be completely shut off. Z-Valve is made with PLA plastic.

To build your own drip irrigation system, please, conjoin the following items:

1.  Scrube [this item is sold separately in our store]

2. Latex tubing (1/4" ID x 3/8" OD) [this item is not sold in our store]

3. Vinyl tubing (1/4" ID x 3/8" OD) [this item not sold in our store]

Weight: 0.06lb (27g)

Height: 16cm (6.29in)

Width: 6cm (2.36in)

Use T-Valve to run your tubes in three directions.

It fits 1/4" ID x 3/8" OD tubes.

- Dimensions: 8mm OD

- Material: PLA plastic

Scrube allows you to convert regular containers into dispensers. It is made with PLA plastic.

To build your own drip irrigation system using Scrubes, please, conjoin with the following items:

1. Z-Valve [this item is sold separately in our store]

2. Latex tubing (1/4" ID x 3/8" OD) [this item is not sold in our store]

3. Vinyl tubing (1/4" ID x 3/8" OD) [this item not sold in our store]

Weight: 7g (0.014lb) each

Height: 4.5cm (1.77in)

Z-Valve gives you the power to be fully in control of how much water you want flowing out of the water container even to the to the drops. It can also be completely shut off. Z-Valve is made with PLA plastic.

To build your own drip irrigation system, please, conjoin the following items:

1.  Scrube [this item is sold separately in our store]

2. Latex tubing (1/4" ID x 3/8" OD) [this item is not sold in our store]

3. Vinyl tubing (1/4" ID x 3/8" OD) [this item not sold in our store]

Weight: 0.06lb (27g)

Height: 16cm (6.29in)

Width: 6cm (2.36in)

1. Size Small: plug tubes up to 1/4" ID

2. Size Medium: plug tubes up to 3/8" ID

3. Size Large: plugs tubes up to 1/2" ID

4. Size X-Large: plugs tubes up to 5/8" ID

Scrube allows you to convert regular containers into dispensers. It is made with PLA plastic.

To build your own drip irrigation system using Scrubes, please, conjoin with the following items:

1. Z-Valve [this item is sold separately in our store]

2. Latex tubing (1/4" ID x 3/8" OD) [this item is not sold in our store]

3. Vinyl tubing (1/4" ID x 3/8" OD) [this item not sold in our store]

Weight: 7g (0.014lb) each

Height: 4.5cm (1.77in)

Use Cross-Valve to run your tubes in four directions. It fits 1/4" ID x 3/8" OD tubes.

- Dimensions: 8mm OD

- Material: PLA plastic

 Our I-Valves are made with PLA plastic. Each of our I-Valves come with a plug which you can use to plug the latex tube when it is not in use. Use I-Valve in conjunction with 1/4" ID latex tubes to run your drip irrigation system.